Advanced Reservoir Engineering

Face-to Face Course

August 12 to 16, 2024

Duration : 5 days

Business context

In the E&P business, Reservoir Engineers play a key role in handling, analysing and interpreting subsurface and production data at all stages of field development. Reservoir Engineering data and models are used in field development plans to optimise economic production of hydrocarbons. 

In this course understanding of fundamental and advanced reservoir engineering concepts is deepened and key tools of modern practical reservoir engineers are discussed, explained and exercised.

Who should attend

Target categories of staff for the advanced course include Reservoir Engineers with a few years of practical experience and Petroleum Engineers and Geoscientists that require more than general knowledge of reservoir engineering.

Course content

  • Reservoir rock properties.
  • Capillary pressures, surface tension, wettability, capillary pressure normalisation.
  • Distribution of hydrocarbon fluids, pressure regimes, fluid gradients and contacts
  • Hydrocarbons-in-place estimation
  • The SPE PRMS and SEC system for reserves and resource classification and estimation
  • Fluid properties and phase behaviour,  PVT correlations, fluid sampling and laboratory procedures
  • Recovery drive-energy, material balance equations, aquifer models and straight line methods.
  • Gas reservoir engineering concepts.
  • Radial flow equations and well behaviour
  • Skin: source and how to minimize it.
  • Theory and practice of oil and gas well testing and pressure analysis techniques.
  • Design and interpretation of pressure transient well tests
  • Production forecasting and Decline Curve Analysis
  • Relative permeability, Corey model, movable oil
  • Immiscible, incompressible and the Buckley Leverett 1D displacement theory, application to water flooding.  Mobility ratio
  • Determination of fractional flow curves and oil recovery.
  • Reservoir simulation modelling principles
  • Secondary recovery and EOR principles
  • Field Development Planning
  • Carbonate and fractured reservoirs
  • Handling uncertainty

Learning, methods and tools

At the end of the Advanced Course participants will have a deeper knowledge of modern reservoir engineering principles and practices for reservoir development and production, including the estimation of oil and gas reserves. They will also have an awareness of the construction and use of reservoir models.

A broad spectrum of modern practical reservoir engineering methods are addressed. Extensive use is made of practical and actual field problems to illustrate relevant subjects.

Topics are introduced by lectures and discussion, and learning is re-inforced by practical small classroom exercises. Active participation and use of laptops and other handheld devices for the exercises is encouraged and facilitated. Hand-out material in paper and/or electronic format will be provided.

Day by day programme

Day 1 – Fluid behaviour and fluid modeling

  • Course Introduction
  • Fundamentals recap
  • Capillary pressure and saturation height relations, Leveret-J function
  • Distribution of hydrocarbon fluids
  • Exercise:  permeability averaging and water breakthrough
  • Laboratory experiments, constant volume depletion, differential liberation.
  • PVT & fluid sampling
  • Exercise PVT correlations for oil and gas

Day 2 – Reserves and DCA methods

  • Reserves Classification systems- the SPE Petroleum Resource Management System
  • The probabilistic method
  • Decline Curve Analysis and Production forecasting
  • Exercise: oil production forecasting

Day 3 – Reservoir models, wells. well behaviour and well tests

  • Oil and Gas Material Balance, aquifers, straight line methods
  • Wells, inflow performance, skin, horizontal wells
  • Exercise: use of well inflow calculations
  • Exercise: gas production forecasting
  • Modern well test analysis,  Pressure Draw Down and Build Up analysis 

Day 4 – Displacement, sweep, flow and reservoir modelling

  • Relative permeability and capillary pressure, wettingness, drainage vs. imbibition,
  • Displacement and Recovery, sweep, heterogeneity,  Buckley-Leverett, movable oil
  • Pseudo relative permeability
  • Exercise mobility ratio
  • Reservoir Simulation – modelling construction and history matching, QA/QC
  • Reading and discussion of simulation field cases 

Day 5 – Recovery and development planning

  • Fractured reservoirs
  • Secondary Recovery, Enhanced Oil Recovery
  • Oil Field Development Planning
  • Gas field development planning
  • Exercise: development planning regulations
  • Handling uncertainty
  • Course Recap, Quiz and Evaluation

12 August 2024


Reservoir Engineering


USD 3900 + VAT + IVA

Starts: 12 August 2024

Ends: 16 August 2024

40 Hours


Reservoir Engineering


USD 3900 + VAT

Course registration

Registration to the course

Scroll to Top



* indicates required

¡Gracias por suscribirte!

¡Pronto recibirás ofertas especiales en nuestros cursos!